Siemens – Frequency Inverter

  • 4
    Yes
    None
    1
    Name...
    /siemens-frequency-inverter/
    Thumbnail








    10 products«1 of 2»
    SIMATIC S7-1500 Image
    3,
    13,
    ,
    SIMATIC S7-1500,
    SIMATIC HMI Basic Panels 2nd Generation Image
    3,
    14,
    ,
    SIMATIC HMI Basic Panels 2nd Generation,
    SINAMICS V20 Basic inverter Image
    3,
    16,
    ,
    SINAMICS V20 Basic inverter,
    SINAMICS G120 Built-in Image
    3,
    16,
    ,
    SINAMICS G120 Built-in,
    SINAMICS G120C Built-in Image
    3,
    16,
    ,
    SINAMICS G120C Built-in,
    SINAMICS G120P Frequency Inverters Image
    3,
    16,
    ,
    SINAMICS G120P Frequency Inverters,
    SIRIUS 3RW40 Image
    3,
    15,
    ,
    SIRIUS 3RW40,
    SIRIUS 3RW30 Image
    3,
    15,
    ,
    SIRIUS 3RW30,
    SIRIUS 3RW44 Image
    3,
    15,
    ,
    SIRIUS 3RW44,
    10 products«1 of 2»
    10 products«1 of 2»
    SIMATIC S7-1500
    SIMATIC S7-1500 Image

    Through its many innovations, the new SIMATIC S7-1500 controller sets new standards for maximized productivity. This benefits small-series machines as well as complex installations that place high demands on speed and deterministics. The SIMATIC S7-1500 is seamlessly integrated in the Totally Integrated Automation Portal (TIA Portal) for maximum engineering efficiency.

    The SIMATIC S7-1500 is modularly structured, with scalable functionality. 
Each controller consists of :
    •    A central processing unit (CPU) for executing the user program
    •    One or more power supplies
    •    Signal modules as inputs/outputs
    •    And technology and communication modules as required.
    •    And Safety? It’s integrated in the F-modules, of course!

    Performance

    Fast, faster, SIMATIC S7-1500: The exceptional system performance allows for extremely fast response times for optimal control quality and highest system performance.

    Processing Speed
    SIMATIC S7-1500 provides even faster signal processing for shorter response times and higher productivity.

    High-Speed backplane bus
    The new backplane bus with a high baud rate and efficient transmission protocol yields the crucial performance advantage for fast signal processing.

    Communication
    SIMATIC S7-1500 has up to 3 PROFINET ports.
    Two ports with identical IP addresses for field level communication and
    a third one with its own
IP address for integration into the company network.
    PROFINET IRT allows defined response times and highly precise plant behavior.

    Integrated Webserver
    CPU status requests are performed over a standard Internet browser, independent of location. Process variables displayed in graphics form and user-defined websites facilitate the acquisition of information.

    3,
    13,
    ,
    SIMATIC S7-1500,
    SIMATIC HMI Basic Panels 2nd Generation
    SIMATIC HMI Basic Panels 2nd Generation Image

    Human Machine Interface: SIMATIC HMI – Efficient to a new level
    As your single-source provider, Siemens’ human machine interface technology SIMATIC HMI is engineered to meet the increasingly complex processes of your machines and systems. SIMATIC HMI is optimized to meet your specific human machine interface needs using open and standardized interfaces in hardware and software, which allow efficient integration into your automation systems.

    Improved Process Quality

    Visualization allows for considerably increased process quality with compact plants or smaller applications. Featuring all important HMI basic functions, SIMATIC HMI Basic Panels 2nd Generation thus open up completely new possibilities in terms of operation and monitoring also in the field of mechanical engineering at a particularly attractive price. Like all other devices in our product range, Basic Panels  2nd Generation offer proven SIMATIC quality and, regardless of display size, numerous software functions as standard – for example, alarm logging, recipe management, trend functions and language switching. SIMATIC HMI Basic Panels 2nd Generation can be configured via SIMATIC WinCC (TIA Portal) in the cost-efficient Basic Edition which already offers the outstanding usability and unprecedented engineering efficiency of the Engineering Framework. The user can easily create visualization applications within short time. As the software is scalable, he can start with a small solution and further expand it any time as required – for example by increasing the number of tags or change to panels of another performance range.

    SIMATIC WinCC (TIA Portal) V13 SP1 includes new features for Basic Panels 2nd Generation such as:

    •    Backup/Restore of all data directly at the Panel with a USB stick for quick and easy device exchange
    •    Integration of a web browser in the project in order to communicate easily with web servers of PLC and Drives

    Highlights

    •    Ideal entry-level range for simple HMI applications
    •    Engineered in the TIA Portal
    •    Installation compatibility with SIMATIC HMI Comfort Panels and existing SIMATIC HMI Basic Panels 4“ and 6“
    •    Flexible scalability within the HMI range
    •    High-resolution, dimmable wide-screen displays with 64.000 colors
    •    Innovative user interface and improved usability thanks to new controls and graphics
    •    Touch / key functionality for intuitive operation
    •    Interface for connection with various PLCs
    •    Versions for PROFIBUS or PROFINET
    •    Archiving via USB stick

    High-resolution wide-screen displays
    SIMATIC HMI Basic Panels 2nd Generation are available with high-resolution wide-screen displays from 4“to12“. These also support configurations with portrait orientation. Their high resolution and color depth of 64,000 colors facilitate
improved process visualization. The displays’ brightness is dimmable up to 100 %, offering optimum flexibility.

    Innovative graphical user interface
    The new innovative user interface provides a great variety in terms of experiencing and operation. The new SIMATIC HMI Basic Panels feature user-friendly touch screens and particularly handy, freely configurable keys.

    Improved usability
    The new USB interface facilitates the connection of keyboard, mouse or barcode scanner and supports easy data archiving on a USB stick

    Perfect interaction
    Thanks to a PROFIBUS or PROFINET interface, SIMATIC HMI Basic Panels 2nd Generation allow for connection with various PLCs.
    The visualization of applications of the Basic Controller SIMATIC S7-1200 offers particularly great added value.

    3,
    14,
    ,
    SIMATIC HMI Basic Panels 2nd Generation,
    SINAMICS V20 Basic inverter
    SINAMICS V20 Basic inverter Image

    SINAMICS V20 – Description
    Siemens is offering a simple and cost-effective drive solution with its compact SINAMICS V20 Basic Performance inverter. SINAMICS V20 sets itself apart as a result of its quick commissioning times, ease of operation, robustness and cost-efficiency. With five frame sizes, it covers a power range extending from 0.12 kW up to 30 kW.

    SINAMICS V20 – an overview of its strengths
    Easy to install
    •    Push-through and wall mounting – side-by-side possible for both
    •    USS and MODBUS RTU at terminals
    •    Integrated braking chopper from 7.5 kW to 30 kW (10 hp up to 40 hp)
    Easy to use
    •    Parameter loading without power supply
    •    Integrated application and connection macros
    •    Keep Running Mode for uninterrupted operation
    •    Wide voltage range, advanced cooling design and coated PCBs increase robustness
    Easy to save money
    •    ECO mode for V/f, V2/f
    •    Hibernation mode
    •    Optimized for solar panel powered pump system
    •    Overload capability for FSE (High – and Low Overload)

    SINAMICS V20 – an overview of the technology
    Voltage and power range:
    1AC 200 V – 240 V, ±10 %; 3AC 380 V – 480 V +10 % / -15 %
0.12 kW – 30 kW (0.17 hp up to 40 hp)
    Control modes:
    V/f, V2/f, FCC

    SINAMICS V20 – typical applications
    SINAMICS V20 has a compact design, and can be individually adapted to the particular application or user requirements using various options (for example, an external BOP, connecting cable, filter, braking resistors, shielding …). The compact and rugged devices are tailored for operating pumps, fans, compressors and conveyor belts as well as for basic drive applications in the process and manufacturing industries.

    3,
    16,
    ,
    SINAMICS V20 Basic inverter,
    SINAMICS G120 Built-in
    SINAMICS G120 Built-in Image

    The converter from 0.55 to 250 kW for versatile applications

    With the second generation SINAMICS G120, Siemens presents a modular converter with higher power density and a space-saving frame size.
    
The redesigned converter series is now available in three voltage variants for connection to 200 V, 400 V and 690 V power supply networks.

    With lots of innovative functions – all major facts at a single glance

    Voltage
    1/3AC 200 … 240 V +/- 10 %
   3AC 380 … 480 V +/- 10 %
   3AC 500 … 690 V +/- 10 %

    Power range
    0.55 kW – 250 kW (LO)

    Degree of protection
    IP20

    Environmental class
    Class 3C2, (3C3 with SIPLUS)

    Ambient temperature
    0 to 50°C

    EMC
    According to IEC 61800-3 up to Category C2

    Standards
    CE, UL, cUL, c-Tick

    Safety Technology
    Safety Integrated: STO (SIL 3, PL e, Kat. 3), SS1, SBC, SLS, SDI, SSM, PROFIsafe

    Communication
    PROFINET, PROFIBUS, USS, Modbus, Ethernet IP, BACnet

    Control procedure
    U/f, Flux Current Control, vector control with and without encoder

    Functions
    Basic positioning function with Epos, regenerative capability through efficient infeed technology (Power Modules PM250 only), PROFIenergy, PROFIdrive

    We support you with the suitable tools to find the right converter

    Integrated software supports user-friendly selection, commissioning and operation. The SINAMICS G120 can not only be set up easily, but provides superior usability already during the commissioning phase and later during operation. The integrated software makes it possible.

    3,
    16,
    ,
    SINAMICS G120 Built-in,
    SINAMICS G120C Built-in
    SINAMICS G120C Built-in Image

    SINAMICS G120C is especially compact with a high power density, and offers a well-balanced combination of functions to address a wide range of applications. With its three frame sizes, it covers a performance range of 0.55 kW to 18.5 kW.
    The new frame size FSAA from 0.55 kW up to 2.2 kW is a real highlight, which sets itself apart as a result of the lower space requirement but with the same power and performance. What is especially important in this regard is that it is fully compatible to the other three frame sizes. The energy-efficient device serves the most common communication interfaces and is an integral part of Totally Integrated Automation.

    Especially compact
    Frame size FSAA has up to 32 % less space combined to FSA
    Side-by-side mounting allows operation in the smallest space
    High degree of operator friendliness
    Simple commissioning / diagnostics and simple integration into the PC tool using the USB interface
    Pluggable terminals facilitate fast installation and replacement; prefabricated cables can be used
    Operating hours counter for “Drive on” and “Motor on”
    Leading edge technology
    Energy-efficient, encoderless vector control – automatic flow reduction with V/F ECO
    No external components are required as a result of the certified Safe Torque Off safety function (STO) integrated as Standard.
    All the usual bus systems, such as PROFINET, Ethernet/IP, PROFIBUS & USS/Modbus RTU are supported.

    With lots of innovative functions – all major facts at a single glance

    Voltage
    3AC 380 … 480 V +10 % / –20 %

    Power range
    0.55 to 18.5 kW

    Degree of protection
    IP20

    Environmental class
    Class 3C2, (3C3 with SIPLUS)

    Ambient temperature
    –10° to 40° C without derating / up to 60° C with derating

    EMC
    According to IEC 61800-3 up to Category C2

    Standards
    CE, UL, cUL, c-Tick

    Safety Technology
    Safety Integrated: Safe Torque Off (STO); controlled via terminals or PROFIsafe

    Communication
    PROFINET, Ethernet/IP,  PROFIBUS, USS/Modbus RTU

    Control procedure
    U/f (linear, square law, FCC, ECO), vector control without encoder (SLVC)

    Functions
    Fixed velocity setpoint, PID controller, motor holding brake control

    3,
    16,
    ,
    SINAMICS G120C Built-in,
    SINAMICS G120P Frequency Inverters
    SINAMICS G120P Frequency Inverters Image

    SINAMICS G120P – Description
    The SINAMICS G120P is a cost-effective, energy-efficient and easy-to-operate inverter with a wealth of functions. As a result of the integrated, application-specific and energy-saving functions, the inverter facilitates cost-effective and efficient operation. It is tailored to address pump, fan and compressor drives in the public domain as well as the industrial environment. Further, it sets itself apart as result of its simple installation and commissioning. It is used for basic speed control as well as for complex closed-loop control tasks in building technology as well as the water and process industries. SINAMICS G120P is available as built-in device up to 560 kW (700 hp) in an IP20 degree of protection, as well as for wall-mounting up to 90 kW (125 hp) in an IP55 degree of protection.
    SINAMICS G120P is a modular inverter system, comprising the closed-loop control unit (Control Unit), a power unit (Power Module) as well as an operating unit. The latter is either the Intelligent Operator Panel or the Basic Operator Panel.
    The Control Unit controls and monitors the Power Module and the connected motors in several selectable operating modes. It supports communication to a local control system as well as to monitoring equipment.
    The Power Module supplies the motors in a power range from 0.37 kW up to 560 kW (0.5 hp – 700 hp)
    The IOP and BOP-2 operating units optimally support users when it comes to operation and commissioning.

    SINAMICS G120P – a brief Summary of its Strengths

    Ruggedness
    • Ambient temperatures from 0 ° to 60 °C
    • Degree of protection IP20, IP20 push-through, IP55
    • Coated modules

    Energy saving using innovative technology
    • Lower line harmonics, higher power factor λ = 0.94 =|P|/S for PM230
    • Efficiency > 98 % for the PM330
    • Flux reduction in the partial load range
    • Hibernation mode

    Communication
    • Integrated in the building automation through Modbus RTU, BACnet MS/TP, Siemens FLN P1
    • Embedded in Totally Integrated Automation through PROFINET and PROFIBUS

    Special functions for building technology
    • Control of flaps, heating and cooling valves using additional PID controller
    • Closed-loop control of pressure, temperature and air quality in up to three zones
    • Essential Service Mode for maximum operating time of the drive in the case of fire

    The range of SIMOTICS motors for SINAMICS G120P
    • SINAMICS G120P low-voltage inverters are harmonized and coordinated for operation with SIMOTICS GP , SIMOTICS SD and SIMOTICS TN motors.
    • Outstanding cost-effectiveness is achieved through the optimum interaction between the SIMOTICS GP- VSD10, SIMOTICS SD- VSD10 as well as the SIMOTICS FD motors
    • SINAMICS G120P converters have been designed for operation with type approved SIMOTICS DP fire gas engines, which have been especially developed for edifices resp. buildings equipped with smoke control systems.

    
SINAMICS G120P – Technical Data

    Voltage and power ranges
    3-ph. 380 V – 480 V AC ± 10%
IP20: 0,37 kW – 560 kW (0.5 hp – 700 hp) 
IP55: 0,37 kW – 90 kW (0.5 hp – 125 hp)

    Types of control
    V/f (linear, square-law, FCC, ECO), sensorless vector control (SLVC)

    Degree of protection
    IP20/UL Open Type 
IP55/UL Type 12

    SINAMICS G120P – Typical Uses
    The SINAMICS G120P frequency inverter is the perfect solution for applications, such as closed-loop speed control for ventilation fans, circulating pumps for heating and cooling systems, booster pumps, or pumps for level control.

    3,
    16,
    ,
    SINAMICS G120P Frequency Inverters,
    SIRIUS 3RW40
    SIRIUS 3RW40 Image

    SIRIUS 3RW40 is the star among our standard soft starters. Thanks to its innovative control method, it is not just the only 2-phase-controlled soft starter in the world for use in the power range up to 250 kW (at 400V) – respectively 300 hp (at 460V) – because of its especially compact design, it ensures a space-saving, clear layout in the control cabinet. It is therefore more than a mere functionally expanded addition to our 2-phase-controlled series of SIRIUS 3RW30/31 soft starters.
    The new 3RW40 soft starters in the lower power range from 5.5 – 55 kW (with 400 V) in sizes S0 to S3 expand the performance spectrum of the 3RW40 soft starters. They represent the compact and price-attractive alternative to start-delta starters.

    Advantages at a glance
    • Uniform connecting system with screw or spring-loaded terminals
    • Space-saving, clear layout in the control cabinet thanks to small, compact design
    • Integrated bridging (bypass)
    • Inherent protection and protection against motor overload without additional wiring
    • Optional thermistor motor protection
    • Avoidance of peak inrush current thanks to adjustable current limitation
    • Simple and fast commissioning
    • Certified according to ATEX standards with sizes S0 – S12

    3,
    15,
    ,
    SIRIUS 3RW40,
    SIRIUS 3RW30
    SIRIUS 3RW30 Image

    Belt slip on heater blowers or a sudden buildup of water pressure in washing installations are only two of the many problems that can occur when motors generate too much power on starting. With the SIRIUS 3RW30 from 1.5 kW to 55 kW (at 400 V) you can easily avoid such problems. And the best of it all is: It is also possible to switch straight from direct to soft start because SIRIUS 3RW30 is the only soft starter in the world that offers identical sizes in a family of devices.

    Advantages at a glance
    • Soft start
    • Steeples starting
    • Uniform connection system with screw or spring- 
loaded terminals
    • Space-saving clear cabinet design thanks to its 
small and compact construction
    • Integral bypass
    • Reduction of current peaks
    • Relief of the power supply network
    • Reduction of the mechanical load in the drive
    • Simple and fast startup and maintenance

    3,
    15,
    ,
    SIRIUS 3RW30,
    SIRIUS 3RW44
    SIRIUS 3RW44 Image

    Thanks to its outstanding functions, the SIRIUS 3RW44 all-round talent handles difficult start-up and deceleration processes in a simple and, above all, gentle manner. With its innovative torque control system, it can be used for drives with a power output up to 710 kW at 400 V – respectively 950 hp at 460 V – in an inline circuit or up to 1200 kW at 400 V – respectively 1700 hp at 460 V – in an inside-delta circuit. Designed for simple handling, the functions are exceptionally easy to use. SIRIUS 3RW soft starters can be used in all sectors worldwide where soft starting without speed control is required.

    Advantages at a glance
    • Optimum acceleration due to torque control
    • Simple and fast commissioning thanks to user-friendly display
    • Savings in size and costs due to optional inside-delta circuit
    • Simple integration in higher-level control units via PROFIBUS

    SIRIUS soft starters now speak PROFINET:
    • Line and ring bus topology thanks to an integrated switch
    • Media redundancy through MRP- Thanks to the redundant design, plant and machine availability are considerably enhanced. This is because the failure of individual devices no longer influences communication.
    • Interval function and measured values for energy management via PROFIenergy
    • NTP-synchronized time
    • Module replacement without PC
    • Comprehensive diagnostics and error alarms
    • OPC UA server function for open communication with visualization and control systems

    3,
    15,
    ,
    SIRIUS 3RW44,
    10 products«1 of 2»
    10 products«1 of 2»
    SIMATIC S7-1500 Image
    SIMATIC S7-1500
    Through its many innovations, the new SIMATIC S7-1500 controller sets new standards for maximized productivity. This benefits small-series machines as well as complex installations that place high demands on speed and deterministics. The... Read More
    3,
    13,
    ,
    SIMATIC S7-1500,
    SIMATIC HMI Basic Panels 2nd Generation Image
    SIMATIC HMI Basic Panels 2nd Generation
    Human Machine Interface: SIMATIC HMI – Efficient to a new level As your single-source provider, Siemens’ human machine interface technology SIMATIC HMI is engineered to meet the increasingly complex processes of your machin... Read More
    3,
    14,
    ,
    SIMATIC HMI Basic Panels 2nd Generation,
    SINAMICS V20 Basic inverter Image
    SINAMICS V20 Basic inverter
    SINAMICS V20 – Description Siemens is offering a simple and cost-effective drive solution with its compact SINAMICS V20 Basic Performance inverter. SINAMICS V20 sets itself apart as a result of its quick commissioning times, ease... Read More
    3,
    16,
    ,
    SINAMICS V20 Basic inverter,
    SINAMICS G120 Built-in Image
    SINAMICS G120 Built-in
    The converter from 0.55 to 250 kW for versatile applications With the second generation SINAMICS G120, Siemens presents a modular converter with higher power density and a space-saving frame size. 
The redesigned converter... Read More
    3,
    16,
    ,
    SINAMICS G120 Built-in,
    SINAMICS G120C Built-in Image
    SINAMICS G120C Built-in
    SINAMICS G120C is especially compact with a high power density, and offers a well-balanced combination of functions to address a wide range of applications. With its three frame sizes, it covers a performance range of 0.55 kW to 18.5 kW... Read More
    3,
    16,
    ,
    SINAMICS G120C Built-in,
    SINAMICS G120P Frequency Inverters Image
    SINAMICS G120P Frequency Inverters
    SINAMICS G120P – Description The SINAMICS G120P is a cost-effective, energy-efficient and easy-to-operate inverter with a wealth of functions. As a result of the integrated, application-specific and energy-saving functions, the i... Read More
    3,
    16,
    ,
    SINAMICS G120P Frequency Inverters,
    SIRIUS 3RW40 Image
    SIRIUS 3RW40
    SIRIUS 3RW40 is the star among our standard soft starters. Thanks to its innovative control method, it is not just the only 2-phase-controlled soft starter in the world for use in the power range up to 250 kW (at 400V) – respectively 3... Read More
    3,
    15,
    ,
    SIRIUS 3RW40,
    SIRIUS 3RW30 Image
    SIRIUS 3RW30
    Belt slip on heater blowers or a sudden buildup of water pressure in washing installations are only two of the many problems that can occur when motors generate too much power on starting. With the SIRIUS 3RW30 from 1.5 kW to 55 kW (at 4... Read More
    3,
    15,
    ,
    SIRIUS 3RW30,
    SIRIUS 3RW44 Image
    SIRIUS 3RW44
    Thanks to its outstanding functions, the SIRIUS 3RW44 all-round talent handles difficult start-up and deceleration processes in a simple and, above all, gentle manner. With its innovative torque control system, it can be used for drives ... Read More
    3,
    15,
    ,
    SIRIUS 3RW44,
    10 products«1 of 2»

    Irrespective of whether pumping, ventilating, compressing, moving or processing: SINAMICS G120 is the universal drive to address the widest range of requirements. It leverages its strengths in general machinery construction as well as in the automotive, textile and packaging industries.

    Its modular design and wide range of power ratings extending from 0.55 kW up to 250 kW always ensures that you can configure the optimum frequency inverter for your particular application. What is also clear:
    With SINAMICS G120, you benefit from the wide range of possibilities that its modular design offers – including remaining flexible and saving costs, thanks to the reduced spare part stocking, for example. And all of this is complemented by the high degree of user-friendliness – from installation through to maintenance. SINAMICS G120 is part of the comprehensive family of SINAMICS drives.

    The advantages of the SINAMICS family – an overview:
    • Wide range of power ratings from 0.12 kW to 85 MW
    • Available in low-voltage, medium-voltage as well as DC versions
    • High degree of flexibility and combinability
    • Simple coupling to SIMATIC control systems and seamless integration in the automation landscape as well as part of Totally Integrated Automation
    • Higher-level, standard Safety Integrated concept
    • Standard and unified functionality as a result of the common hardware and software platform
    • Common engineering for all drives
    ––SIZER for engineering
    ––STARTER / SINAMICS Startdrive for parameterizing and commissioning