Share
Get In Touch
//Load Cell and Indicator

What is Load Cell

load cell is a transducer which converts force into a measurable electrical output. Although there are many varieties of load cells, strain gage based load cells are the most commonly used type.

Except for certain laboratories where precision mechanical balances are still used, strain gage load cells dominate the weighing industry. Pneumatic load cells are sometimes used where intrinsic safety and hygiene are desired, and hydraulic load cells are considered in remote locations, as they do not require a power supply. Strain gage load cells offer accuracies from within 0.03% to 0.25% full scale and are suitable for almost all industrial applications.

As a supplier of load cell and indicator in Malaysia, we offer a wide range of the most common types of load cells mainly in the industrial sectors by providing each and everyone quality, availability and assistance.

Load cells: Single point, shear beam, double shear, bending, tension, compression, low profile, pin, anchor, wire rope measuring, pre-amplified, column, foot brake, for weighbridge, load limiters.

For all load cells, we are able to provide suitable weigh modules, with the aim of obtaining the correct application of the load cell and maximum reliability and accuracy, and compatibly with the mechanical, electrical and pneumatic connections present on the weighing structure.

We supply weight Indicators and transmitters for PC/PLC connection through the main field buses on the market i.e. are Modbus RTU, Modbus TCP, PROFIBUS DP, PROFINET IO, Ethernet/IP, Ethernet TCP/IP, EtherCAT, POWERLINK, DeviceNet, CANopen, CC-Link, CC-Link IE, IO-Link, SERCOS III, etc.

The wide range of products and components for industrial weighing systems is designed to be in compliance with the most relevant industry standards and is certified by the most established national and international bodies.

LAUMAS Load Cell and Indicator
Load Cell and Indicator

HOW A DIGITAL LOAD CELL WORKS

Digital load cells are an essential part of any weighbridge, as they measure the weight of the load on the weighbridge.

The digital load cell converts the mechanical force of the load into a digital signal which can then be used to calculate the weight of the load.

Digital load cells are generally more accurate than analog load cells, as they are not affected by temperature changes or vibration. However, they are more expensive and require a digital controller to operate.

LAUMAS produces weight Indicators, scale controllers and weight transmitters for PC/PLC connection to the most important international brands like Siemens, Rockwell Automation, Allen-Bradley, B&R

Automation, Omron, Beckhoff, Schneider, Panasonic, Mitsubishi, Bosch Rexroth, Vipa, ABB, etc.) through the main field buses on the market: Modbus RTU, Modbus TCP, PROFIBUS DP,

PROFINET IO, Ethernet/IP, Ethernet TCP/IP, EtherCAT, POWERLINK, DeviceNet, CANopen,

CC-Link, CC-Link IE, IO-Link, SERCOS III, etc.).

The wide range of products and components for industrial weighing systems is designed to be

in compliance with the most relevant industry standards and is certified by the most established

national and international bodies.

laumas-product

© DNC Automation (M) Sdn Bhd 2020-2022 / All rights reserved.

Get In Touch
Close
× How can I help you?