Intralogistics Explained: Material Flow from Goods-In to Dispatch
Intralogistics, or internal logistics, is the organisation, control and optimisation of every material and information flow inside one site, from the goods-in dock where supplier pallets arrive to the dispatch lane where finished pallets leave. In a factory that path runs through raw-material storage, line-side supply, production, the end-of-line packing cell and the finished-goods warehouse…
Read more- 21 views
- 0 Comment
AGV vs Conveyor for Pallet Transport: Which Fits Your Plant
An AGV and a pallet conveyor both move finished unit loads from a production line to storage or the dock, but they pay for route length in opposite ways. A pallet conveyor pays once, in metres of frame: it carries a queue of pallets at the same time, so its hourly capacity is set by..
Read more- 21 views
- 0 Comment
Industry4WRD Grants: How Malaysian Factories Fund Automation
Industry4WRD is Malaysia’s National Policy on Industry 4.0, launched by the Ministry of International Trade and Industry (MITI) on 31 October 2018 for the 2018–2025 period, and for a manufacturer planning automation the policy works as a funding gateway rather than a slogan. The policy reaches a production line through three instruments: the Industry4WRD Intervention..
Read more- 21 views
- 0 Comment
Conveyor vs AGV: Capacity, Buffering and Failure Compared
Failure behaviour follows the same structure: a conveyor stops in series, because one faulty zone halts every pallet behind it, while an AGV fleet degrades in parallel, because one vehicle out of service leaves the others moving. “If a single AGV or AMR is offline, these systems can still move product, but a faulty conveyor..
Read more- 19 views
- 0 Comment
AGV vs AMR: Differences in Navigation, Flexibility & Cost
AGV vs AMR compares two kinds of driverless material transport. An automated guided vehicle (AGV) follows a route the system fixed in advance, read from magnetic tape, floor wires, QR codes or reflectors. An autonomous mobile robot (AMR) locates itself on a SLAM (simultaneous localisation and mapping) map built from lidar and camera data and plans its..
Read more- 37 views
- 0 Comment
AGV Safety Standards: ISO 3691-4, Safety Scanners & Speed Zones
AGV safety standards are led by ISO 3691-4, the international safety standard for driverless industrial trucks, whose current 2023 edition covers automated guided vehicles, autonomous mobile robots, tunnel tuggers and under-cart vehicles, with ANSI/ITSDF B56.5 as the North American counterpart. Both AGV safety standards rest on the same mechanism. A safety laser scanner slows the..
Read more- 114 views
- 0 Comment
AGV Pallet Transport at End of Line: Palletizer → Stretch Wrapper → Dock
AGV pallet transport at the end of a production line moves finished unit loads without a driver, from the palletizer outfeed through the stretch wrapper to a staging lane at the dock, on orders a fleet manager receives from the plant’s PLC, WMS or MES. The vehicle is usually a pallet truck AGV with covering..
Read more- 27 views
- 0 Comment
AGV Navigation Types: Magnetic Tape, QR Code, Laser & Natural Navigation
AGV navigation types fall into four families, and the clearest way to tell them apart is where each one keeps its position reference. Magnetic tape navigation follows a strip on the floor. QR code navigation reads a grid of codes printed on the floor. Laser navigation measures angles to reflectors mounted on walls and pillars…
Read more- 64 views
- 0 Comment
Case Packing Automation Guide: Selection and Integration
Case packing automation replaces manual box-loading with a machine that erects, loads, and seals cases as one continuous cycle. A case packer sits between the filling or capping station and the palletizer, closing the gap where labor-intensive handling once slowed a production line. Manufacturers across food and beverage, personal care, and industrial goods adopt case..
Read more- 31 views
- 0 Comment
Accumulation Conveyor Working Principle: What the Zones Actually Do
An accumulation conveyor holds product temporarily between two stations that are running at different paces, so a slower or stopped downstream machine does not force the upstream machine to stop with it. The working principle comes down to one mechanical idea: the conveyor is divided into zones, and each zone can start or stop on..
Read more- 34 views
- 0 Comment


Recent Comments